Flortex PU Twin Pack has been created to provide a totally impervious hard wearing floor sealer. Available in either a matt, satin or gloss finish.
The polyurethane formulation will adhere to a wide range of substances including walls and floors, and will reduce porosity whilst providing a dustproof surface. The coating is not only UV light resistant but is also extremely easy to clean.
Supplied in 5 litre units.Coverage: approx 8-10m2 per litreBargain Basement versions available at big discounts
Pot life:1 – 2 hours @ 20oC
Application temperature:10oC – 30oC
Initial curing time:6 – 8 hours
Light traffic:12 – 16 hours
Full traffic:2 days
Recoat time:6 – 8 hours
Number of parts supplied:2
Priming required:Porous surfaces should be primed with WD Primer
Please consult the technical data sheet for full technical product data.
Preparation:Thorough substrate preparation is essential.Surfaces to be coated must be clean, dry and free of loose contaminants.
Air temperature minimum 5oC, maximum 30oC, humidity 70% RH maximum. Ensure good drying conditions prevail throughout the application and cure of the product.
Mixing:
Having fully prepared the substrate, stir the individual components before mixing together.
Add Part ‘B’ to Part ‘A’ and thoroughly mix for at least 3 minutes. For best results use a heavy duty slow speed drill with a mixing paddle.
Care must be taken when mixing to ensure that the hardener is properly dispersed.
Ensure thorough mixing as an unmixed product will result in a poor or non-cure situation.
Application:
Flortex PU Twin Pack can be applied by brush or roller at a thickness of 40 microns.