Typical Uses:
Hospitals, kitchens, dairies, breweries, nursing homes, abattoirs, schools, leisure centres, food processing plants etc.
HyGlaze ABC is ideal for coating walls and ceilings where hygiene is essential. Available in Semi Gloss.
An easy to use, single pack, hygienic wallcoating. This product has been professionally formulated to include the bacterial agent ‘Bactron’, which has been permanently bonded into the coating.
Most hygiene coatings only offer bacteriostatic protection, i.e: they will not support the growth of bacteria. HyGlaze ABC offers bactericidal protection, meaning that bacteria will be actively killed. What’s more, bacteria cannot develop resistance to Bactron!
Controls E.coli 157, salmonellae, staph, aureus, listeria monocytogenes, shigella, yersinia and other bacteria
Excellent flow and levelling
Easy to apply
High coverage
Good gloss retention
Low odour
Touch dry in 2 hrs
Supplied in 5 litre units.
Number of parts:1
Application Temperature:Minimum 10oC
Drying time @ 20oCTouch dry: 1 hour
To recoat: 8 hours
Full hardness: 3 days
Coverage:9 – 12m2 per litre
Please consult the technical data sheet for full technical product data.
Preparation:Thorough substrate preparation is essential.
The substrate should be clean and dry, free from ascending humidity and sufficiently coherent. HyGlaze™ Anti-Bacterial Coating can be applied directly onto most mineral substrates. Curing compounds in case of poly-concrete have to be removed by means of grit blasting.
On new concrete or non-porous concrete, remove cement grout by grit blasting or treatment with Polycote Etch IT. Porous substrates shall be impregnated with HyGlaze™ Anti-Bacterial Coating diluted with 10-20% water. HyGlaze™ Anti-Bacterial Coating may not be applied on a flexible paint coat or a moving substrate. See relevant Safety Data Sheet prior to application.
Once prepared, the area must be kept clean and free of traffic.
Mixing:
Having fully prepared the substrate, stir the component thoroughly before use.
Application:
Brush/roller – Do not dilute.
Air-atomised spray – Dilute with max. 5% water.
Airless spray – Use a nozzle size of 018 and a pressure of 180 bars. If necessary, dilute with max. 5% water.